OPTOELECTRONICS N100 FM Notch Filter NEW scanner radio

Description

OPTOELECTRONICS
N100
FM NOTCH FILTER
The N100 FM Notch Filter is designed to provide 30dB of attenuation for signals in the FM broadcast band of 88-108MHz.
All of our Optoelectronics nearfield devices look for a signal that is 15dB above the background RF floor. Once it detects that dominant signal it stops and locks on that signal and displays the frequency.
FM stations are very strong signals that can raise the background RF floor significantly. If you have the possibility to lower your background RF by 30dB then the signal(s) of interest have less RF to climb through in order to be detected by the frequency counter or nearfield receiver. This allows signals to be captured from a greater distance than without the N100, or lower power transmitters to be detected that once could not because the background RF levels were too high.
If you live in or near a metropolitan area chances are very good that the RF from FM transmitters is present. The N100 goes a long way towards helping the frequency counter or nearfield receiver do its job.
The N100 FM Notch Filter provides 30dB of attenuation in the FM broadcast band (88-108MHz). Works with any Optoelectronics product.  Can also be used with any other communications or test equipment.  BNC connection at each end.
N100 shown in use with OPTOELECTRONICS Digital Scout & DB32 Antenna
Digital Scout & DB32 Antenna not included - SOLD SEPARATELY
This product is BRAND NEW and is being sold FACTORY DIRECT from the Manufacturer, OPTOELECTRONICS in this auction.  This product has a 1 year Parts/Labor Warranty and includes Owner's Manual.  This is NOT a Refurbished unit, it is FIRST QUALITY BRAND NEW FACTORY DIRECT PRODUCT.  The unit purchased in this auction is a FINAL SALE and not refundable or returnable.
To purchase other OPTOELECTRONICS products visit our Ebay Store
For more technical information on this item call
Toll Free 877 261 3437
954 642 8997
SALES AT OPTOELECTRONICS DOT COM