-40%
CRL Brushed Nickel Geneva 037 Series Wall Mount Full Back Plate Standard Hinge
$ 23.76
- Description
- Size Guide
Description
Catalog Number:GEN037BN
Finish:
BRUSHED NICKEL
Self-Centering with Reversible 5 Degree Pivot Pin
Use Monolithic Tempered Glass
Available in Several Beautiful Finishes
Three Year Warranty
Wall Mount Full Back Plate Standard Model (Factory Set for Standard Closing Position)
The
CRL Geneva Series
of professional Hinges is able to accommodate 5/16" (8 mm) to 1/2" (12 mm) glass. A variety of six styles gives design flexibility, including three different Wall Mount and three different Glass-to-Glass types. Geneva Hinges are self-centering and contain a Reversible 5 Degree Pivot Pin. In addition, Custom Pivot Pins are available to accommodate "off-angle" installations. Made of solid brass with all moving parts (pins and springs) in stainless steel.
Standard Reversible Pivot Pin:
Each Geneva Hinge contains a Reversible Pivot Pin. One side of the Pin is marked 90 Degrees. The opposite side is marked 85 Degrees. Standard Geneva Hinges come with the 90 Degrees side activated. Offset Models come with the Pin pre-set to 85 Degrees (5 degree tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.
Using two hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 80 lbs. (36 kg) with a maximum door width of 28" (711 mm).
Using three hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width of 32" (813 mm).
SPECIFICATIONS:
Glass Thickness:
5/16" (8 mm) to 1/2" (12 mm) Tempered Safety Glass
Special Feature:
Offers choice of Standard Model factory set at standard 0 degree closing position, or 5º Pre-Set Model for tighter closure into shower interior.
Construction:
Solid Brass
Hinge Swings:
90º in and 90º Out
Closing Type:
Self-Centering when within 15º of Closed Position
Cut-Out Required Includes:
Gaskets, Screws, and Glass Fabrication Dimensions. Cat. No. GEN13 Gasket Pack must be purchased separately for use with 5/16" (8 mm) thick tempered glass.