1 ea - 3/8" Dia x 5-1/2" L Weight Stack Pin Selector Key- Push Button & Lanyard

Description

For use in weight stacks on fitness machines and exercise equipment
Click Here to See All of our Weight Stack Pins!
This pin is for 10 lb weight stack plates and wider up to about 6" wide.  T-handle is made of anodized aluminum and has a hole in one side with an attached lanyard cord.  There are 2 spring-loaded ball detents (see enlarged photos) that are designed to contact the inside of the weight pin hole to help keep it in place during use of the machine. Compression of the ball detents is directly controlled by pushing the thumb button on the outside of the T-handle.  Pins will not compress by putting finger pressure on the ball bearing detents - the button must be pressed.   Double ball detents make a stronger hold than just one, not to mention stronger spring pressure behind the ball bearings. Lanyard cord is wire rope cable, encased in PVC outer coating.  The pliable PVC outer layer will not scratch or mar your weight stack or framework.  Lanyard is equipped with chrome-plated key rings at each end.  The loose end may be attached to the top of the weight stack to help prevent selector keys from getting lost.  Lanyard will stretch from 13" ring-to-ring (at rest) to more than 40" from ring-to-ring to accommodate just about any weight stack configuration.
Quantity:
1 Pin
Pin Diameter:
3/8" Nominal - .380" Actual
Pin Overall Length:
5-3/4" - including push button
Maximum Penetration of Pin into Weight Stack:
5-3/4" Deep
Distance from edge of T-handle Collar to Center of Ball Detent:
5-1/2"
Distance from pointed Tip of Pin to Center of Ball Detent:
1/4"
Width of T-handle:
2-5/16"
Weight (each):
4 oz (122 grams) - including lanyard
Material:
Case Hardened Steel for the Pin/ 6061 Aircraft Aluminum for the T-handle
Coating:
Cadmium Plating for the Pin/ Black Anodized for the T-handle
Search our store for other hard-to-find fitness parts and accessories
K-194
Sellebrity Analytics